A diagnostic analysis on the effect of the residual layer in convective boundary layer development near Mongolia using 20th century reanalysis data   总被引：1，自引：0，他引：1  

Bo Han  Cailing Zhao  Shihua Lü  Xin Wang 《大气科学进展》2015,32(6):807-820

Although the residual layer has already been noted in the classical diurnal cycle of the atmospheric boundary layer,its effect on the development of the convective boundary layer has not been well studied. In this study, based on 3-hourly20 th century reanalysis data, the residual layer is considered as a common layer capping the convective boundary layer. It is identified daily by investigating the development of the convective boundary layer. The region of interest is bounded by(30°–60° N, 80°–120° E), where a residual layer deeper than 2000 m has been reported using radiosondes. The lapse rate and wind shear within the residual layer are compared with the surface sensible heat flux by investigating their climatological means, interannual variations and daily variations. The lapse rate of the residual layer and the convective boundary layer depth correspond well in their seasonal variations and climatological mean patterns. On the interannual scale, the correlation coefficient between their regional averaged(40°–50°N, 90°–110° E) variations is higher than that between the surface sensible heat flux and convective boundary layer depth. On the daily scale, the correlation between the lapse rate and the convective boundary layer depth in most months is still statistically significant during 1970–2012. Therefore, we suggest that the existence of a deep neutral residual layer is crucial to the formation of a deep convective boundary layer near the Mongolian regions.  相似文献   

An experimental study on major element release from the sediments in the Changjiang (Yangtze River) Estuary     

Guo  Yanwei  Yang  Shouye 《中国海洋大学学报(英文版)》2015,14(3):417-424

With the enhanced warming and acidification of global ocean, whether and to what extent the naturally-weathered fluvial sediment into the sea can release elements and thus influence the geochemical pro...  相似文献   

利用高分影像和珞珈一号数据进行住房空置率高精度空间估算     

张栋  李德平  周亮  黄金侠  高航  王嘉丞  马宇 《测绘通报》2021,(1):41-46,52

本文主要利用珞珈一号夜间灯光数据和高分遥感影像数据,提出了一种对研究区按建成区高层区、建成区低层区和非建成区住房进行空置率分区块估算的方法,采用夜晚实地记录的方法对估算结果进行精度检验,并通过LISA聚集图分析其空间聚集情况。表明结果：①研究区整体住房空置率为17.88%,均方根误差为0.14,其中非建成区的住房空置率整体上要高于建成区,而满置率却低于建成区;②研究区住房空置率呈高高集聚和低低集聚两种空间集聚特征,为进一步大范围了解农村地区住房情况及整体的空间分布规律提供了参考。  相似文献   

建筑物立面分类与DIM点云滤波     

崔颖  黄鹤  刘祥磊  罗德安 《测绘通报》2021,(3):55-59

针对目前基于近景摄影测量方法构建建筑物立面模型过程中因密集影像匹配（DIM）点云噪声所引起的建筑物立面TIN网格模型畸变问题,本文借鉴机器学习中样本学习的思想,对建筑物立面进行了分类并对DIM点云提出了相应的滤波方法,以达到去除DIM点云噪声和改善其TIN网格模型畸变的目的。其中,针对平面结构立面,采取先对点云样本进行学习计算构建数学立面模型所需参数,再对该立面模型设定阈值并对其点云进行滤波处理的方法;针对曲面结构立面,则结合DIM点云特性先将点云样本分类标记归为立面点与非立面点,再进行样本特征值学习,使用Logistic回归算法迭代计算求解最佳回归系数,从而构建滤波分类器的方法对立面点云进行滤波处理。试验结果表明,本文滤波处理方法能将立面DIM点云噪声有效识别并去除,而且使用该方法处理后所得点云构建的建筑物立面TIN网格模型精细化程度得到有效提高,模型质量得到明显改善。  相似文献   

不同截止高度角下BDS-3SPP精度分析     

朱玉香  陈永贵  安春华 《测绘通报》2021,(3):23-27

针对卫星可见数与历元可用率较低情况下的BDS-3定位性能,本文基于MEGX跟踪站BDS-3与GPS实测数据,分析了不同高度角（10°、20°、30°、40°）下BDS-3卫星B1I、B1C、B2a、B3I,以及GPS系统L1频率的单点定位（SPP）精度。研究发现,BDS-3平均卫星可见数与卫星空间几何构型优于GPS,且随着高度角的增加呈线性变化。BDS-3的4个频率的SPP精度随着高度角的增加呈先增加后降低的趋势,高度角为20°时,定位精度最高,高度角达到40°时,定位精度最低,且历元可用率也最低;但B1I和B3I历元可用率仍大于90%,而B1C和B2a历元可用率大于70%;不论是SPP定位精度还是历元可用率,均优于GPS系统L1频率。  相似文献   

Impact of different sampling rates on precise point positioning performance using online processing service     

Serdar Erol  Reha Metin Alkan  ?.Murat Ozulu  Veli Il?i 《地球空间信息科学学报》2021,24(2):302-312

In this study, the effect of different sampling rates (i.e. observation recording interval) on the Precise Point Positioning (PPP) solutions in terms of accuracy was investigated. For this purpose, a field test was carried out in ?orum province, Turkey, on 11 September 2019. Within this context, a Geodetic Point (GP) was established and precisely coordinated. A static GNSS measurement was occupied on the GP for about 4-hour time at 0.10 second (s)/10 Hz measurement intervals with the Trimble R10 geodetic grade GNSS receiver. The original observation file was converted to RINEX format and then decimated into the different data sampling rates as 0.2 s, 0.5 s, 1 s, 5 s, 10 s, 30 s, 60 s, and 120 s. All these RINEX observation files were submitted to the Canadian Spatial Reference System-Precise Point Positioning (CSRS-PPP) online processing service the day after the data collection date by choosing both static and kinematic processing options. In this way, PPP-derived static coordinates, and the kinematic coordinates of each measurement epoch were calculated. The PPP-derived coordinates obtained from each decimated sampling intervals were compared to known coordinates of the GP for northing, easting, 2D position, and height components. According to the static and kinematic processing results, high data sampling rates did not change the PPP solutions in terms of accuracy when compared to the results obtained using lower sampling rates. The results of this study imply that it was not necessary to collect GNSS data with high-rate intervals for many surveying projects requiring cm-level accuracy.  相似文献   

地层渗透性对岩石强度及机械钻速影响因素分析     

杨谋  孟英峰  李皋  李永杰  徐翔  唐思洪  孙敏 《地质科技情报》2011,30(3):127-131

分析了地层渗透性对井底围压及破岩效率产生的影响,并对地层渗透性进行了分类,在此基础上建立了围压下岩石强度模型;基于压持效率制约了井底净化环境,修正与完善了不同地层渗透性的机械钻速模型,确定了各项参数.应用聚类分析中最优分段法对测井参数与录井参数进行了分类处理并编程获得了单轴下和围压下岩石强度剖面及机械钻速剖面,分别选取...  相似文献   

Critical conditions for natural gas charging and delineation of effective gas source rocks for tight sandstone reservoirs     

Fujie Jiang  Xiongqi Pang  Fengtao Guo  Jigang Guo 《Geological Journal》2016,51(1):113-124

Although it has been shown that the potential of tight‐sand gas resources is large, the research into the mechanisms of hydrocarbon charging of tight sandstone reservoirs has been relatively sparse. Researchers have found that there is a force balance during hydrocarbon charging, but discriminant models still have not been established. Based on the force balance conditions observed during gas migration from source rocks to tight sandstone reservoirs, a calculation formula was established. A formula for identifying effective source rocks was developed with the gas expulsion intensity as the discrimination parameter. The critical gas expulsion intensity under conditions of various burial depths, temperatures, and pressures can be obtained using the calculation formula. This method was applied in the Jurassic tight sandstone reservoirs of the eastern Kuqa Depression, Tarim Basin, and it was calculated that the critical expulsion intensity range from 6.05 × 10⁸ m³/km² to 10.07 × 10⁸ m³/km². The critical gas charging force first increases with depth and later decreases with greater depths. The distribution range of effective gas source rocks and total expelled gas volume can be determined based on this threshold. This method provides new insight into and method for predicting favourable tight‐sand gas‐bearing regions and estimating their resource potentials. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

南海神狐海域天然气水合物注热降压开采数值模拟研究   总被引：2，自引：0，他引：2  

胡立堂  张可霓  高童 《现代地质》2011,25(4)

针对南海神狐海域天然气水合物成藏条件,利用pT+H软件和水平井技术对天然气水合物的注热和注热降压开采效果进行了模拟分析。重点讨论了注入热水温度为30、60、90℃时水合物饱和度以及CH4气体饱和度、CH4产气率、累积CH4产气量和产水量的变化规律,发现两种开采模式下水合物低饱和度分布范围随时间增长和温度升高而增大;CH4产气率在开采10 d内升高较快,之后逐渐减小。模拟结果表明:注热降压开采模式比单纯注热模式的效果有较大改善,而且温度对于提高CH4产气量效果不明显,但因为天然气水合物藏的低渗透性,神狐海域的天然气水合物的CH4产气量不大。研究结果可为南海神狐海域和类似地区天然气水合物开采提供参考。  相似文献   

热磁技术方法条件实验及相关问题   总被引：1，自引：0，他引：1  

胡树起  马生明  刘崇民  李冰  席明杰 《物探与化探》2011,35(2):212-217

热磁技术方法条件实验主要包括焙烧粒度、温度、时间及热磁组分分离等实验内容,对各技术环节进行了设计、试验,确立了一套合理的样品焙烧、热磁组分分选的技术流程,并就实验中遇到的一些问题进行了分析探讨,为热磁地球化学方法的引入、推广提供了基础技术支持。  相似文献